Lingdu Refrigeration teaches you three fast and time-saving defrosting methods

1. The medicine shade cabinet should be kept clean and tidy in the workshop;

2. The medicine shade cabinet should be placed indoors for operation, with a stable and level device. It should be kept dry, moisture-proof and moisture-proof, and attention should be paid to avoiding corrosion

3. The place where drugs are stored in a cool cabinet should be at least 10cm away from the wall on all sides

4. Before using the medicine shade cabinet, the voltage should be checked. The required voltage is 220V. Based on the power switch with sufficient capacity of the power device, suitable power wires should be selected, and grounding operations should be done well

5. After the above homework is ready, the medicine can be placed in the medicine shade cabinet, then the power is connected, the shade cabinet switch is turned on, the temperature is set, and the medicine shade cabinet enters the working condition. After taking the medicine, the cabinet door should be closed in a timely manner to ensure stable temperature

6. The drugs should not be placed too densely, and items should not be placed in the temperature sensor (hole) position inside the box to avoid affecting the temperature control sensing. Preventing the placement of flammable, explosive, volatile, and corrosive materials has led to a rapid increase in sales of refrigerators since 2013. The refrigeration function of refrigerators has become increasingly complete, but there are still many customers who have been troubled by the problem of frost formation in refrigerators. The following are some quick defrosting methods provided by the editor:

(1) When defrosting is needed, first turn off the power of the freezer, then use an electric fan or hair dryer to aim at the freezer and turn it to the maximum gear. With the wind blowing, the frost layer will melt very quickly, making it easy to remove.

(2) After each defrosting of the freezer, use a towel to dry the freezer compartment and apply a layer of vegetable oil on the stainless steel inner wall. When the next frosting occurs, the suction force between the frost and the freezer wall is greatly reduced due to its attachment to the oil containing freezer wall. Therefore, we can easily peel off the clumps without much effort

(3) Before placing food in the freezer, apply a layer of plastic film to the walls of the freezer to allow the cold air to easily adhere. Then, place the food in the freezer for freezing. When defrosting is required, quickly take the frozen food out of the refrigerator for temporary storage. Simply tear off the plastic film in the freezer to quickly remove the frost, and then apply the shaken film to the freezer to sustainably freeze the food. This method of defrosting only takes a few minutes, saving time, effort, and electricity.